Can You Use Skateboard Wheels On Roller Skates? (Answered)

Can you use skateboard wheels on roller skates? The answer is yes. You can use Skateboard wheels on roller skates with wheels diameters ranging between 55mm and 65mm and widths between 30mm-35mm.

However, if you use larger wheels on roller skates, then it will affect your skating performance because it will increase the weight of your roller skates.

Many skateboard and roller skate wheels have the same bearings, diameter, shape, and similar core spacing.

Can you use skateboard wheels on roller skates? Video Answer

The following video will answer all your questions about, whether can I use skateboard wheels on roller skates or not and you will also learn how to put skateboard wheels on your roller skates.

How do I Know If Skateboard Wheels will Fit on My Roller Skates?

It is important to consider a few factors when determining whether skateboard wheels will fit on roller skates or not.

1. Wheels diameter: First, You need to check that your skateboard wheel diameter is the same as your roller skate wheel diameter. If it’s not, you won’t be able to use the wheel. It should be between 55mm and 65mm for roller skates. 

2. Wheels width: If the width of your skateboard wheels is around 30-35mm and matches your plate, you can surely use them.

3. Bearing size: Roller skate bearings come in different sizes based on their width and the number of balls used in each bearing. Mostly the bearings that come with your skates will be 608-size bearings (8mm). There are other sizes available but these are most common on inline skates and rollerblades.

Are Roller Skate Wheels the Same as Skateboard Wheels?

No, roller skate wheels are not the same as skateboard wheels.

Roller skate wheels tend to be wider than those used on a skateboard, with an average diameter ranging from 55-65 mm. Skateboard wheels usually measure around 50-60mm in size and have a harder durometer rating due to their purpose (skating over rougher surfaces).

In terms of hardness, skateboard wheels are generally harder than roller skate wheels and are made of highly-resilient Urethane.

Roller skate wheels on the other hand are softer than skateboard wheels because they need to be able to grip surfaces properly so that you can take turns in an efficient manner without slipping or sliding off your feet. 

Roller skate wheels are better for cruising and tricks on flat surfaces, while skateboard wheels are better for doing tricks on ramps and riding in more extreme conditions. 

However, some people do use skateboards with roller skate wheels and vice versa, so it really depends on what you’re looking for and what you’re comfortable using.

Pros of Using Skateboard Wheels on Roller Skates:

  • Skateboard wheels are easy to install on roller skates because they fit into the same axle holes that the old wheels used to occupy.
  • You can find skateboard wheels in all sizes and colors, so you can customize your skates to match your style.
  • They are better for skating surfaces like concrete or asphalt.
  • Skateboard wheels are more durable than regular roller skate wheels.

Cons of Using Skateboard Wheels on Roller Skates:

  • They’re not made for roller skating, so they won’t always be smooth enough to be comfortable.
  • You could lose control of your skates and fall down.
  • It’s a lot of pressure on your ankles and knees.
  • Your shoes might not grip the ground as well as they should.

Can you use Skateboard Bearings on Roller Skates?

Yes, you can use skateboard bearings on roller skates if the axles of the roller skates are 8mm.

Actually, there are two sizes of axles for roller skate trucks: 7mm and 8mm. However, if your roller skates have 7mm axles, you will need to purchase bearings specifically for roller skating.

Roller skating bearings are slightly smaller than standard skateboard bearings, so they will not fit properly if used in the wrong application.

How To Put Skateboard Wheels On Roller Skates?

If you want to use skateboard wheels on your roller skates, you can do so. However, you need to ensure that they are the right size and type of skateboard wheels for your roller skates.

What you will need:

  • A skate tool or a wrench and socket set
  • Skateboard bearings (optional)
  • The right size of wheels.

It’s easy to install skateboard wheels on roller skates, Here’s how:

Step 1: Remove the old wheels. You should be able to pop them off with your hands, but if they’re stuck, use a screwdriver or a pair of pliers.

Step 2: Put new skateboard wheels on your roller skates. Line up the holes in the new skateboard wheels with those in your roller skates’ frames, and push them into place. If they don’t fit easily, try using a rubber mallet or hammer to tap them into place.

Step 3: Attach the axle screws, then tighten them securely by hand or with pliers until the wheels are firmly attached.

Step 4: Test your new skateboard wheels by moving around on them for a few minutes before going for a real ride.

Tip: Make sure that all of the screws are tight before riding your roller skates so that nothing comes loose while you’re skating.

Also Read: Can You Put Cruiser Wheels On A Skateboard?

Differences Between Skateboard Wheels and Roller Skate Wheels?

Skateboard wheels and roller skate wheels are similar in many ways, but they also have some key differences. Here are some of the main ones:

1. The biggest difference is bearings. Roller skate wheels are side-set (bearings on the side of the wheel). Side-set roller skates use bearings that fit into holes on either side of each wheel.  

Skateboard wheels are center-set (bearings sit in the center of the wheel). Center-set skateboards use bearings that sit in between two rings around each wheel.

2. Roller skate wheels are slightly larger than Skateboard wheels. However, the axle of the skateboard wheels is longer than the roller skates.

3. Skateboard wheels have a diameter that can range anywhere between 75mm to 110mm. On the other hand, Roller skates have a diameter range of 72mm to 80mm.

What Type Of Wheels Are Best For Roller Skating?

The type of wheel you want to use depends on where you will be skating.

Consider getting hard wheels if you are skating indoors (88A-102A). A good starting point would be a hardness of 88a-92a. 

This will allow you to have more control over your skateboard while still giving you enough grip and speed to have fun with it.

When skating outdoors, 78A is a good choice because it will absorb bumps on rough surfaces like concrete or asphalt floors.

This will allow better control when making turns because it is easier to get off balance when skating on rough surfaces.

Soft wheels ranging between (78A-87A) are usually used for beginners because they provide better grip and control on the floor.

If you are a professional skater or an intermediate one, then hard wheels will be more appropriate. Hard wheels have more speed and are more controllable. Also, they offer better acceleration than soft wheels. 

Is It Dangerous To Use Skateboard Wheels On Roller Skates?

Skateboard wheels are cool. They’re fun, fast, and look great on your roller skates. But is it dangerous to use skateboard wheels on roller skates?

It’s a common misconception that skateboard wheels are dangerous to use on roller skates. While they can be, they don’t have to be.

If you’re using skateboard wheels on your roller skates, make sure you know what you’re doing and how to do it safely. 

You’ll need to set up your roller skates with the right size of wheel and axle and make sure that your bearings are in good shape.

The truth is, skateboard wheels can be safe to use on your roller skates if you know what you’re doing.

Let’s talk about how to tell if a Skateboard wheel is right for your roller skates:

1. Make sure the skateboard wheel is the right size for your roller skate—it won’t be too big, and it won’t be able to turn properly.

2. Make sure there’s enough space between the axle and the inner part of your tire (called the “hub”). If there isn’t enough space, then the hub will rub against the axle as you skate—and that can cause damage to both parts.

3. Check out your bearings. If they’re not working properly, they might make noise when you roll or give them out sooner than usual.

Conclusion: Can you put Skateboard Wheels on Roller Skates:

In conclusion, I hope you found this article on, can you use skateboard wheels on roller skates, helpful and informative.

I have presented some information about roller skates with skateboard wheels and how you can use them.

All in all, you can use skateboard wheels for roller skating. It is a bit tricky at first, but with more practice, you’ll be able to keep your balance and do cool tricks. Just remember to use brakes for safety! Stay protected with the proper safety gear to avoid getting hurt.


Frequently Asked Questions: Skateboard Wheels on Roller Skates:

Here, I have briefly answered some of the most commonly asked and most relevant questions.

Q1. Will skateboard wheels work on roller skates?

Ans. The answer is yes. Skateboard wheels and roller skate wheels are similar in diameter, shape, and core spacing means that skateboard wheels can be successfully transferred to roller skates.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top

AdBlocker Detected!

https://i.ibb.co/9w6ckGJ/Ad-Block-Detected-1.png

Dear visitor, it seems that you are using an adblocker please take a moment to disable your AdBlocker it helps us pay our publishers and continue to provide free content for everyone.

Please note that the Brave browser is not supported on our website. We kindly request you to open our website using a different browser to ensure the best browsing experience.

Thank you for your understanding and cooperation.

Once, You're Done?