Can You Put Penny Board Wheels On A Skateboard? Skateboard Elite

If you’re a skater who’s looking to switch things up, you might be wondering if can i put penny board wheels on a skateboard.

The answer is Yes, Penny board wheels are slightly smaller than standard skateboard wheels, but they will fit on a skateboard. Just be sure to get the right size of hardware to attach the wheels to the skateboard.

The benefits of using Penny Board wheels on a skateboard are that they provide a smoother ride and are easier to control.

Let’s discuss in detail how to put penny board wheels on skateboards along with its pros and cons.

Table of Contents

Few Things to Keep in Mind: (Penny Board Wheels on a Skateboard)

First, you’ll need to make sure your deck has enough clearance.
Also, the width of the wheelbase on a penny board is typically narrower than that of a standard skateboard, so you may need to adjust your trucks accordingly.
The size of the wheels is important. Penny board wheels are typically smaller than regular skateboard wheels. This means that they will not roll as fast and may be more difficult to control.
It’s important to get the right size screws and axle spacers when making the switch.
You may also need to adjust your trucks to make them tighter or looser depending on your skating style.

Also Read: Can you do tricks with penny board wheels?

How to Put Penny Board Wheels on a Skateboard?

You can put penny board wheels on a skateboard and it’s actually not that difficult. The following is a quick guide on how to do it.

Step 1: Gather the Materials you will Need

Here are the tools and hardware you will need to install penny board wheels on your regular skateboard:

4 Penny Board Wheels
8 Bearings
Skate Tool or wrench
Hardware (nut & bolts)

Step 2: Remove the Existing Skateboard Wheels

To do this, simply use a skate tool or wrench to loosen the axle nuts.

Once the nuts are loosened, you can remove the wheels.

Keep each nut and bolt aside in a safe place. You’ll need these later when you’re attaching new wheels to your skateboard deck.

Step 3: Insert Two Bearings into Each Wheel

To make sure that you have enough clearance for your penny board wheels, insert two bearings into each of the penny board wheels.

Step 4: Place the Wheels on the Axle Bolts on the Penny Board

Next, place one wheel at a time in its proper position on your skateboard by lining it up with both sides of the axle using a ruler or other straight-edge piece of wood.

Once it is lined up properly, push down on each side until it locks firmly into place. Repeat this process for each wheel until you have all four attached securely to your board

Step 5: Tighten the Nuts to Secure the Wheels

To tighten the wheels on your skateboard, you will need a skate tool or wrench. Be careful not to over-tighten the nuts, as this can damage the wheels.

And that’s it!

Your skateboard is now ready to ride with its new Penny board wheels. Enjoy!

Pros of putting Penny Board Wheels on a Skateboard

Softer urethane material makes the ride smoother.
Penny Board Wheels are much easier to control due to their increased grip and stability.
Penny board wheels are cheap, which makes them easy to replace.
Penny board wheels are light, so your board moves faster.

Cons of putting Penny Board Wheels on a Skateboard

The wheel size is not the same as the actual skateboard, so you need to make adjustments.
Penny Board wheels are not ideal for tricks.
It quickly wears out.

Why Put Penny Board Wheels on a Regular Skateboard?

Penny Board wheels can be attached to regular skateboards for a number of reasons.

Penny Board wheels are made out of polyurethane. This material is softer than traditional skateboard wheels. Because of this, Penny Board wheels will grip the ground better and provide a smoother ride overall.

Secondly, the Penny Board wheels are smaller and easier to maneuver than regular skateboard wheels. This can be helpful for tricks and for getting around tight spaces.

Another reason is that Penny Board wheels are made of a softer material, which makes for a smoother ride. This can be beneficial for beginners who are just learning to skateboard, or for anyone who wants a more comfortable ride.

So, if you’re looking for a smoother ride, then you should definitely consider putting Penny Board wheels on your regular skateboard.

How Long do Penny Board Wheels Last?

Penny boards are a lot of fun to ride, but how long do their wheels last? It depends on how often you ride and what type of terrain you ride on.

In case you ride your penny board rarely and mostly on smooth surfaces, you can expect the wheels to last for several months or even years. However, if you ride frequently or on rougher terrain, the wheels may only last a few weeks or months.

Ultimately, it is important to check the condition of your wheels frequently and replace them when necessary to ensure a safe and enjoyable riding experience.

The good news is that replacement wheels are relatively inexpensive, so even if your wheels don’t last as long as you’d like, you can always get new ones.

However, with proper care and maintenance, your penny board can provide years of enjoyment.

Wrap up on Can you put penny board wheels on a skateboard

To sum up, You can put penny board wheels on a skateboard with a few easy steps as mentioned above. It is easy to do if you have the right tools and materials. You can make your skateboard unique.

However, the size and width of the wheels will need to be considered.

Also, make sure the trucks are compatible with the new wheels. With a little bit of research and effort, it is possible to have a unique skateboard that is perfect for you.